H4 Series Case Type 3

Dimensions : 150mm x 132mm x 127mm (Height)

Possible combination of SATA drives fits inside the case ;
Option 1 : 2x 2.5″ 15mm SATA drives
Option 2 : 1x 2.5″ 15mm SATA drive and 2x 2.5″ 9.5mm SATA drives
Option 3 : 4x 2.5″ 9.5mm SATA drives

Products shipped from May 2025 onwards have been changed to accommodate four 15mm thick 2.5-inch storage devices.
As a result, the height of Case Type-3 has increased by 20mm, and four 20mm support (spacer) parts have been added accordingly.

A thin 92x92x15mm cooling fan can be installed internally as an option.
The hole for the second Ethernet port of H4+ and H4 Ultra is user-configurable: use a cutter to separate it from the rear panel.
This case is not compatible with the H2/H3 series.

• Cooling fan and net card are not included in this product.
• We recommend that you use an electric screwdriver when assembling the cooling fan with this case.
• We recommend that you use SATA Data and Power Cable (200mm) for this product.

A thin 92x92x15mm cooling fan can be installed internally as an option.

• Top panel
• Rear panel
• Front panel
• Bottom panel
• Inner bracket
• Left/Right Panel
• 2 x 2.5″ SATA HDD/SSD bracket
• 4 x 20mm (M/F) PCB Supports
• 2 x 16-9mm (M/F) PCB Supports (steel)
• 4 x 50mm (F/F) PCB Supports
• 4 x 70mm (M/F) PCB Supports (steel)
• 20 x 6mm Truss Head Bolts
• 4 x 8mm Truss Head Bolts
• 4 x Rubber Feet (Round / Black)